Hello,
I am trying to use the Report Lable function to essentially print 6 Baseball cards on both sides. My plan would be to print one side then put the paper in again and print the other side.
The front Side looks like this and works great!
Fields with a 1 and 2 are printed on the FRONT
1st record 2nd Record 3rd Record
_________ ______
| Side1 | |Side 1 Etc......
| Town1 | |Town 1
| ID-1 | | ID-2 ID-3
|Side 2 |
| Town 2 |
------------
4th Record 5th Record 6th Record
The Back Side looks like this and works great!
Fields with a 3 and 4 are printed on the Back
1st record 2nd Record 3rd Record
_________ ______
| Side3 | |Side 3 Etc......
| Town3 | |Town 3
| ID-1 | | ID-2 ID-3
|Side 4 |
| Town 4 |
------------
4th Record 5th Record 6th Record
However, When you Flip the Paper, and print the other side, The ID's do not align
i.e. the front side is ID-1, and the back side is ID-3
My Table is setup as follows (No other Tables are involved in this function)
Waybills:
- Side1 Short Txt
- Town1 Short Txt
- Color1 Short Txt
- Side2 Short Txt
- Town2 Short Txt
- Color2 Short Txt
- Side3 Short Txt
- Town3 Short Txt
- Color3 Short Txt
- Side4 Short Txt
- Town4 Short Txt
- Color4 Short Txt